Overview

General comment

Production covered

Fan-out package in the mid-size body, built by molding dies into a reconstituted rectangular panel and forming the redistribution wiring and solder balls on that panel. Functional unit is one package STARTED: the reference flow is a single package entering assembly, and the activities listed run through completed assembly and final test of that package.

Modelling choices

By the count-once yield-ownership convention, the gross-up from packages started to good packages is carried by the consuming IC or component dataset, not here.

Technology: FOPLP
Geography: Global average data from equipment vendor specifications and industry literature

System boundary

The figure groups this dataset's unit processes by class. It is not a count of manufacturing steps — each process runs over as many passes as the flow requires, and those pass counts ship with the dataset.

Download this figure (SVG)

Data quality and references

Composite DQI 1.9 Very good

Reliability

2.8

Completeness

2.3

Temporal

1.5

Geographic

2.0

Technological

1.1

Pedigree scores follow the ecoinvent data-quality matrix: 1 is the best attainable, 5 the weakest. The composite is their aggregate.

Sampling procedure: Equipment vendor specifications, academic papers, industry literature
Coverage status: Partial
Pedigree-scored source files: 12 — the source records behind this dataset's manufacturing operations. Each carries the five pedigree axes above; the composite DQI aggregates them.

Technosphere inputs

15 flows. Quantities are not published; they ship with the dataset on Circa.

Polyimide (PMDA/ODA) Process chemicalg · ±25%

Derivation basis: Calculated by the manufacturing model. The linked REEL dataset carries the upstream life cycle sources.

No source is attached to this row.
Source citations: Not stated
Upstream REEL dataset: Polyimide (PMDA/ODA) ((C22H10N2O5)n)
Background dataset: Modelled by REEL; see the upstream dataset above.
Uncertainty: ±25% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

ArF Photoresist Process chemicalg · ±25.1%

Derivation basis: Lithography parameters

No source is attached to this row.
Source citations: Not stated
Upstream REEL dataset: ArF Photoresist (193nm)
Background dataset: Modelled by REEL; see the upstream dataset above.
Uncertainty: ±25.1% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

TMAH Developer (2.38% solution) Process chemicalg · ±33.3%

Derivation basis: Calculated by the manufacturing model. The linked REEL dataset carries the upstream life cycle sources.

No source is attached to this row.
Source citations: Not stated
Upstream REEL dataset: TMAH Developer (2.38% solution) (N(CH3)4OH (aq))
Background dataset: Modelled by REEL; see the upstream dataset above.
Uncertainty: ±33.3% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Water supply (municipal) Waterm3 · -45.8% / +46.2%

Derivation basis: Calculated from process-water and ultrapure-water demand across all manufacturing operations, plus facility water allocated to each finished unit. The fresh intake shown is that demand less the share reused under the water-recycling scenario this dataset assumes, and wastewater follows the same balance.

No source is attached to this row.
Source citations: Not stated
Upstream REEL dataset: Water Supply (Municipal)
Background dataset: Modelled by REEL; see the upstream dataset above.
Notes: Net fresh-water intake, supplied as municipal water
Uncertainty: -45.8% / +46.2% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: m3

Electricity, Taiwan (TW) ElectricitykWh · -49.5% / +62.3%

Derivation basis: Calculated from equipment energy across all manufacturing operations. It also includes the assembly site's facility overhead: air handling and cleanroom conditioning, chilled water, compressed dry air, exhaust and dust collection, wastewater treatment and uninterruptible power.

The sources below come from the manufacturing operations behind this row.
Sources (inherited): Inherited, rolled up from the contributing process steps:

CAE Online: Teradyne Catalyst Specifications

EE Journal: "Advantest Unveils New Ultra-High-Current Power Supply" (2024)

4Semi: TEL Precio Wafer Prober Specifications

FormFactor Summit 11000/12000 Facility Planning Guide

3D InCites: "ERS Electronic Introduces High Power Dissipation Thermal Chuck" (2023)

Abachy: "How Much Energy and Water Are Required for Wafer Fabrication" (2025)

Guste, Marinas & Ong, Machines 12 (2024) 467, Table 3; Besi Datacon 2200 evo product page
Background data: ecoinvent 3.12
Background dataset: electricity, medium voltage
Uncertainty: -49.5% / +62.3% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: kWh

N₂ Process gasg · -34.6% / +45.8%

Derivation basis: Cure atmosphere

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12
Background dataset: nitrogen, liquid
Uncertainty: -34.6% / +45.8% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Compressed air Process gasg · -30.5% / +38.9%

Source citations: CAE Online: Teradyne Catalyst Specifications
EE Journal: "Advantest Unveils New Ultra-High-Current Power Supply" (2024)
4Semi: TEL Precio Wafer Prober Specifications
FormFactor Summit 11000/12000 Facility Planning Guide
3D InCites: "ERS Electronic Introduces High Power Dissipation Thermal Chuck" (2023)
Abachy: "How Much Energy and Water Are Required for Wafer Fabrication" (2025)
Background data: ecoinvent 3.12
Background dataset: compressed air, 700 kPa gauge
Uncertainty: -30.5% / +38.9% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Ar Process gasg · -46% / +63%

Derivation basis: Calculated from per-operation consumption, operation counts, and manufacturing yield.

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12
Background dataset: argon, liquid
Uncertainty: -46% / +63% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Epoxy Mold Compound (EMC) Process chemicalg · ±1.8%

Derivation basis: Calculated from per-operation consumption, operation counts, and manufacturing yield.

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12
Background dataset: epoxy resin insulator, SiO2
Uncertainty: ±1.8% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Cu Plating Solution Process chemicalg · -40% / +60%

Derivation basis: Plating parameters

No source is attached to this row.
Source citations: Not stated
Background data: proxy-mapped
Background dataset: copper sulfate
Uncertainty: -40% / +60% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Flux (water soluble) Process chemicalg · -39.8% / +99.9%

Derivation basis: Calculated from per-operation consumption, operation counts, and manufacturing yield.

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12
Background dataset: flux, for wave soldering
Uncertainty: -39.8% / +99.9% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

RDL Cu Materialkg

Derivation basis: Calculated from per-operation consumption, operation counts, and manufacturing yield.

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12
Background dataset: copper, cathode
Uncertainty: No range defined.
Unit: kg

Tin Materialkg

Derivation basis: Calculated from per-operation consumption, operation counts, and manufacturing yield.

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12
Background dataset: tin
Notes: From solder (96.5% tin)
Uncertainty: No range defined.
Unit: kg

Silver Materialkg

Derivation basis: Calculated from per-operation consumption, operation counts, and manufacturing yield.

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12
Background dataset: silver
Notes: From solder (3.0% silver)
Uncertainty: No range defined.
Unit: kg

Copper, cathode Materialkg

Derivation basis: Calculated from per-operation consumption, operation counts, and manufacturing yield.

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12
Background dataset: copper, cathode
Notes: From solder (0.5% copper)
Uncertainty: No range defined.
Unit: kg

Outputs and waste

Wastewater Wastewaterm3 · -45.8% / +46.2%

Derivation basis: Calculated from the water balance: fresh-water input minus evaporation.

No source is attached to this row.
Source citations: Not stated
Background data: carried, no background dataset
Background dataset: No treatment route recorded for this output.
Uncertainty: -45.8% / +46.2% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: m3

Spent adhesive Solid wasteg

Derivation basis: Calculated from the mass balance of spent materials and consumables, with treatment selected from the waste classification.

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12 treatment route
Background dataset: treatment of hazardous waste, underground deposit
Uncertainty: No range defined.
Unit: g

Broken dies Solid wasteg

Derivation basis: Engineering estimate based on yield loss

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12 treatment route
Background dataset: treatment of inert waste, sanitary landfill
Uncertainty: No range defined.
Unit: g

EMC flash/cull Solid wasteg

Derivation basis: Calculated from material efficiency

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12 treatment route
Background dataset: treatment of inert waste, sanitary landfill
Uncertainty: No range defined.
Unit: g

EMC flash/excess Solid wasteg · -24.8% / +25.2%

Derivation basis: Calculated from the mass balance of spent materials and consumables, with treatment selected from the waste classification.

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12 treatment route
Background dataset: treatment of inert waste, sanitary landfill
Uncertainty: -24.8% / +25.2% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Release film Solid wasteg · -24.8% / +25.2%

Derivation basis: Calculated from the mass balance of spent materials and consumables, with treatment selected from the waste classification.

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12 treatment route
Background dataset: treatment of inert waste, sanitary landfill
Uncertainty: -24.8% / +25.2% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Grinding slurry waste Solid wasteg · ±25%

Derivation basis: Calculated from the mass balance of spent materials and consumables, with treatment selected from the waste classification.

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12 treatment route
Background dataset: treatment of hazardous waste, underground deposit
Uncertainty: ±25% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Mixed process waste Solid wasteg · ±0.9%

Source citations: p2infohouse.org (date not recorded). Florida Pollution Prevention Program - Electroplating Tip Sheet: Drag-Out Reduction (2000). Report.
p2infohouse.org (date not recorded). Florida Pollution Prevention Program - Electroplating Tip Sheet: Rinse Water Reduction (2000). Report.
Park et al. - Effects of the degradation of methane sulfonic acid electrolyte on the collapse failure of Sn-Ag alloy solders for flip-chip interconnections, RSC Advances, 2017
Background data: ecoinvent 3.12 treatment route
Background dataset: treatment of inert waste, sanitary landfill
Uncertainty: ±0.9% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Spent photoresist (liquid spin-off) Solid wasteg · -24.9% / +51.1%

Source citations: patents.google.com (date not recorded). US9720325B2, "Photoresist coating scheme". Patent.
patents.google.com (date not recorded). US7405033B2, "Method for manufacturing resist pattern and method for manufacturing semiconductor device". Patent.
microchemicals.com (date not recorded). MicroChemicals GmbH, "Spin-Coating", chapter of Basics of Microstructuring / Fundamentals of Microstructuring. PDF document.
cdn.vanderbilt.edu (date not recorded). MICROPOSIT S1805 POSITIVE PHOTORESIST, Material Safety Data Sheet, revision date 04/08/2011, version 3.2. PDF document.
nanofab.utah.edu (date not recorded). JSR ARF AM 2073J-19 Material Safety Data Sheet, date prepared April 15, 2009 (Revision 5). PDF document.
epa.gov (date not recorded). US EPA, Emission Inventory Improvement Program (EIIP) Volume II, Chapter 6: Preferred and Alternative Methods for Estimating Air Emissions from Semiconductor Manufacturing, 2/24/99. PDF document.
rcrapublic.epa.gov (date not recorded). US EPA RCRA Online RO 11249, memorandum 9444.1987(18), letter to Mr. Frank Czigler, S & W Waste Inc., dated MAY 20 1987. PDF document.
patents.google.com (date not recorded). US9421567B2, "Recycle photochemical to reduce cost of material and environmental impact". Patent.
pmc.ncbi.nlm.nih.gov (date not recorded). Ni, J., Zhang, Q., Zhang, X., Sun, Z., Bao, D., "Detection Method and Common Characteristics of Waste Solvent from Semiconductor Industry", Molecules 28(16):5992, 2023. Journal article.
epa.gov (date not recorded). US EPA, "Defining Hazardous Waste: Listed, Characteristic and Mixed Radiological Wastes".
semiengineering.com (date not recorded). SemiEngineering, "Improving EUV Process Efficiency".
dspace.mit.edu (date not recorded). Modeling and analysis of extrusion-spin coating: an efficient and deterministic photoresist coating method in microlithography (MIT Mechanical Engineering thesis). Thesis.
Background data: ecoinvent 3.12 treatment route
Background dataset: treatment of hazardous waste, hazardous waste incineration, with energy recovery
Uncertainty: -24.9% / +51.1% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Dielectric spin-off Solid wasteg

Derivation basis: Dielectric dispense and waste rate

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12 treatment route
Background dataset: treatment of inert waste, sanitary landfill
Uncertainty: No range defined.
Unit: g

Dicing slurry (Si/EMC/Cu particles) Solid wasteg

Derivation basis: No retrievable public document identified

No source is attached to this row.
Source citations: Not stated
Background data: ecoinvent 3.12 treatment route
Background dataset: treatment of hazardous waste, underground deposit
Uncertainty: No range defined.
Unit: g

Emissions to air

3 elementary flows released to air by this dataset's own operations. Quantities are not published; they ship with the dataset on Circa.

VOCs (from EMC cure) Emission to airg

Derivation basis: Engineering estimate based on EMC composition

No source is attached to this row.
Source citations: Not stated
Compartment: Air (non-urban air or from high stacks)
ecoinvent 3.12 elementary flow: NMVOC, non-methane volatile organic compounds
Uncertainty: No range defined.
Unit: g

VOCs (from resist/dielectric) Emission to airg

Derivation basis: Engineering estimate based on material usage

No source is attached to this row.
Source citations: Not stated
Compartment: Air (non-urban air or from high stacks)
ecoinvent 3.12 elementary flow: NMVOC, non-methane volatile organic compounds
Uncertainty: No range defined.
Unit: g

Flux volatiles Emission to airg

Derivation basis: Calculated as an air release, from a mass balance on the process gases going in, with the destruction or removal efficiency of any point-of-use abatement applied.

No source is attached to this row.
Source citations: Not stated
Compartment: Air (non-urban air or from high stacks)
ecoinvent 3.12 elementary flow: NMVOC, non-methane volatile organic compounds
Uncertainty: No range defined.
Unit: g

Emissions to water

1 elementary flow released to water by this dataset's own operations. Quantities are not published; they ship with the dataset on Circa.

Si Emission to waterg

Source citations: p2infohouse.org (date not recorded). Florida Pollution Prevention Program - Electroplating Tip Sheet: Drag-Out Reduction (2000). Report.
p2infohouse.org (date not recorded). Florida Pollution Prevention Program - Electroplating Tip Sheet: Rinse Water Reduction (2000). Report.
Park et al. - Effects of the degradation of methane sulfonic acid electrolyte on the collapse failure of Sn-Ag alloy solders for flip-chip interconnections, RSC Advances, 2017
Compartment: Water (surface water)
CAS number: 7440-21-3
ecoinvent 3.12 elementary flow: Silicon
Uncertainty: A minimum-maximum range is defined for this flow. Bounds ship with the dataset on Circa.
Unit: g

Flows not quantified

2 flows are recorded for this dataset but carry no quantity — cut off below the significance threshold, or with no background dataset available. They remain inside the declared system boundary; each is listed with its reason.

Cut off - below the significance threshold (2)

Adhesive solvent Process chemicalg · -50% / +100%

Derivation basis: Calculated from per-operation consumption, operation counts, and manufacturing yield.

No source is attached to this row.
Source citations: Not stated
Background data: cut off
Background dataset: Not applicable: this flow is not quantified in the inventory.
Reason: A generic adhesive solvent, typically isopropanol or similar, consumed in small amounts. Isopropanol is already tracked in the main processes, so no separate upstream production dataset is attached here.
Uncertainty: -50% / +100% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Seed Etchant (Cu/Ti) Process chemicalg · -40% / +60%

Derivation basis: Etching parameters

No source is attached to this row.
Source citations: Not stated
Background data: cut off
Background dataset: Not applicable: this flow is not quantified in the inventory.
Reason: Seed-layer removal is a wet-bench step using phosphoric acid for tantalum-based seed layers, or sulfuric acid with hydrogen peroxide for copper. Those acids are already tracked in this inventory's wet chemistry, and the additional consumption for seed removal alone is minimal, so no separate upstream production dataset is attached.
Uncertainty: -40% / +60% around the published quantity. The bounds themselves ship with the dataset on Circa.
Unit: g

Limitations and unquantified flows (2)

Limits this dataset declares about itself: first any limit stated in its own description, then any limit it declares flow by flow, grouped by channel. Each entry below is the model's own disclosure.

These materials are used at a step of the modelled flow and are also carried by this dataset's own material list. Each is counted once, on that list, and the step does not book it again: RDL layer 1 uses Cu sputtering target and Cu electroplating anode; RDL layer 2 uses Cu sputtering target and Cu electroplating anode; RDL layer 3 uses Cu sputtering target and Cu electroplating anode; Ball attach reflow (panel) uses SAC305 solder balls.
Some consumable pulls referenced by the modelled process steps did not resolve to an inventory row and are absent from this dataset. They are itemised in the dataset's own export audit.

The flows above are this dataset's own records. What follows are the scope rules set once for the whole database in the methodology report, repeated here so every dataset page carries them.

Database-wide boundary policy — applies to every REEL dataset

These boundaries are set once for the whole database, in Chapter 2 of the methodology report, and apply to this dataset wherever they are relevant to it. The excluded flows listed above are specific to this dataset.

Use phase: Product operation is outside the cradle-to-gate scope.
End-of-life treatment: Recycling and disposal are outside the cradle-to-gate scope.
Distribution and retail: The gate is a finished component ready for integration into a higher-level assembly.
Inbound transport of raw materials: Transport of purchased raw materials to the manufacturing facility is already inside the upstream "market for" datasets that users link to a background database, so it is not modelled a second time here. This does not cover freight between REEL production stages, which is modelled where a dataset authors it.
Returnable shipping containers: Where freight between production stages is modelled, the mass moved is the product itself. The shipping container (FOSB, SEMI M31) is returnable capital equipment whose per-trip share is unsourced, so its tare is excluded from the transport effort.
Photomask fabrication: A mask set's embodied burden is amortised across a high-volume production run and is not attributed per wafer. Users assessing low-volume production should add mask fabrication separately; the methodology report gives the basis for the exclusion.
Employee transport, administration and R&D overhead: Employee transportation, facility administration and R&D/pilot-production overhead are outside scope.
Capital goods: Manufacturing equipment, cleanroom construction and facility infrastructure are excluded, on the grounds of absent public data on equipment embodied energy, uncertainty in equipment lifetime and allocation, common practice in electronics LCA, and a focus on the operational inventory. Future versions may include capital goods when sufficient public data becomes available.
Precious metal recovery credits: Scrap recovery credits for precious metals are excluded pending data availability.
Wafer reclaim: Test wafers and scrap are outside the system boundary.

Inside the boundary, linked rather than modelled

Silicon ingot growth and wafer slicing: Inside the cradle-to-gate scope, but treated as upstream material inputs linked to background databases rather than modelled as REEL processes.
Freight between production stages: Where a dataset's product moves between REEL production stages - wafer fabrication to the packaging site, for example - that leg is authored as a transport service and linked to an ecoinvent freight activity. It is measured as a transport effort in tonne-kilometres, not as a mass. Route distances are authored per route class with a stated band; a lower bound of zero is a modelling statement that the two sites can be co-located, not a missing value.

Cut-off criteria

A flow is excluded from a process inventory when it contributes less than 1 % of the total mass of inputs to that unit process, or less than 1 % of its total energy input. The denominator is total process inputs, not product mass. That distinction matters in semiconductor manufacturing, where the input mass of water, chemicals and gases greatly exceeds the product mass, so the threshold removes only genuinely minor flows.

Included regardless of the cut-off

Perfluorocarbons (CF4, C2F6, SF6, NF3) - high GWP, EPA regulated
Heavy metals (Pb, Cd, Hg, Cr(VI)) - RoHS regulated, high toxicity
Volatile organics (photoresist solvents, PGMEA) - air quality
Precious metals (Au, Ag, Pd, Pt) - high embodied impacts
Ozone-depleting substances (legacy CFCs, HCFCs) - Montreal Protocol